ENV 737-6 Type

Silbermann manufactures the ENV 737-6 Medical Gas Outlet (Terminal Unit) by ISO 9170-1 and ENV 737-6 standards. The product complies with the requirements of NFPA 99 and EN 7396-1 and is CE marked by the notified body TÜV SÜD.

It includes gas-specific indexing to avoid the risk of incorrect connections.

We design our gas outlets for durability and to provide continuous, reliable medical gas flow to both patients and medical equipment.

Each outlet is thoroughly tested for flow and leaks and is cleaned for oxygen use before shipping.

Our ENV 737-6 type gas outlets are developed in collaboration with industrial designers to create a visually appealing and comfortable environment for patients and medical staff.

Compatible with various gas types, including Oxygen, Medical Air, CO₂, Nitrous Oxide, Vacuum, and Nitrogen.

Downloads:

Spec Sheets
  • Accepts ENV 737-6 gas-specific adapters.
  • All medical gas outlets are 100%
    hydrostatic tested     for leaks.
    The outlets are factory-assembled    ,
    degreased, and cleaned for 
    medical gas service.
  • Indexed to eliminate interchangeability
    of     gas services.
  • 360-degree swivel inlet pipe for
    ease of     installation.
  • Double position allowing parking of
    male     adapter in the outlet.
  • Low maintenance due to use of VITON
    seals in front assembly (latch value).
  • Medical Gas System Standards:
    • NFPA99 & EN ISO 7396-1 requirements.
  • Applicable Standards:
    • ISO 9170-1, ENV 737-6.
  • Silbermann's Quality Management System:
    • CE marked by the notified body TÜV-SÜD.

  • The medical gas outlet shall be 
    SILBERMANN ENV type manufactured 
    according to ISO 9170-1 ENV 737-6.
  • The outlet shall be gas-specific
    by indexing     each front service panel
    to a gas-specific pin-indexed     rough-in
    module.
  • The outlet of positive and negative
    pressure     shall consist of a primary
    and secondary check valve     to allow
    testing and online     maintenance.
  • Outlet shall be manufactured with
    175 mm     long, type K, 12.7 mm (1/2”)
    OD copper     pipe. The rough-in pipe
    shall be silver-brazed on     the outlet body.
  • With the rough-in mounted, the outlet
    shall be     depth adjustable to compensate
    for     various wall thicknesses.
  • The quick-connect outlet shall comply
    with     ISO 9170-1 standard type and
    accept only     corresponding ENV 737-6 Gas Specific Adapter.
  • Pressure drop of less than 20 Kpa
    through     the outlet at 120 LPM and 350
    ( Kpa 3.5 Bar)     inlet pressure.
  • When fully open, the outlet allows a low
    of up     to 600LPM and pressure of
    400 KPa (4 Bars).
Related products