Mazor-XT: Fully Automatic Digital Medical Gas Manifold System

• Continuous supply and smooth automatic bank switchover, without pressure fluctuation, using a pneumatic shuttle valve.
• Maintenance friendly- designed to enable maintenance during operation without disrupting the gas supply.
• LCD 12” touch screen display.
• Graphically & digitally display the actual status of each source- “In use” or “Stand by”.
• Visual & audio alarm signals in case of: low pressure in the main source line, change between banks, “Below min” and High/Low line supply pressure.
• Leak detection from manifolds.
• Secured Ethernet-based network communication between all units.
• Unique secured authentication of each unit to avoid fake/masking of alarms.
• Flow & Consumption – Monitors & displays flow rate and consumption of the medical gas*.
• A color trend arc showing the gas pressure status on the main line and at each bank
• Optional- display of heaters during idle and active states. Heaters activated during manifold operation.
• Automatic adjustment of screen brightness (day & night mode).
• Log History File- Event logging, recording all alarms and panel activities.
• Periodical maintenance alert.
• Commissioning- Pressure test.
• Customizable text & language.
• Advanced Communication:
  • TCP/ IP Modbus
  • Remote monitoring through the building management system available.
  • Option for remote viewing through a mobile device or remote computer.
• Silbermann’s Quality Management System:
  • EN ISO 13485-2016
  • ISO 9001-2015

* Available according to customer’s request.

• Display: 12” HD LCD touchscreen

• Cabinet with door:
  • Material – Galvanized steel
  • Dimensions – 60x100x25 cm
  • Finish – baked on powder-coated

• Piping System: All materials are oxygen-compatible and cleaned for oxygen use.

• Changeover Unit: Pneumatic.

• Flow Capacity (4 Bar):
  • Standard configuration 90 m³/hr
  • Optional 120 m³/hr
  • Optional 150 m³/hr

• Power Supply: 110-220V, 60-50Hz.
• Each cylinder station includes an HP valve, pigtail with integrated NRV, and a secure chain.
• An electrical power supply unit was installed on the external side of the cabinet. The unit enables the connection of 2 supplies:
  • Supply from the mains / essential / UPS
  • Supply from batteries (Optional)

• Output connections for area alarms:
  Two sets of dry contacts: NO/NC.
• Connection: TCP/ IP Modbus.
• Optional:
  • Heaters (for N2O or CO2).
  • Bank heavy-duty high-pressure filters.