Sil-Ohio Diamond Type

We design and manufacture our Sil-Ohio Diamond Type Medical Gas Outlet (Terminal Units) for long-lasting performance, ensuring consistent and reliable medical gas flow to patients and medical equipment in hospitals, clinics, ambulances, and more.

All outlets are fully tested for flow and leaks and cleaned for oxygen service before shipping.

Our Sil-Ohio Diamond Type gas Outlets are thoughtfully designed by industrial designers to provide a pleasant and attractive environment for both patients and medical staff.

Available in a variety of gas types, including oxygen and vacuum, with color-coded identification for easy recognition. Multiple configurations—such as wall-mounted, panel-mounted, and pendant-mounted—are available upon request.

Downloads:

Spec Sheets
  • Accepts Sil-Ohio diamond-
    type gas-specific     adapters.
  • All outlets are 100% hydrostatic
    tested     for leaks. The outlets are factory-
    assembled, degreased, and cleaned for
    medical gas service.
  • Indexed to eliminate interchangeability
    of gas services.
  • 360 deg swivel inlet pipe for ease of
    installation.
  • Low maintenance due to use of VITON
    seals in front assembly (latch value).


Medical Gas System Standards:

  • NFPA99, EN ISO 7396-1 requirements.

Applicable Standards:

  • NFPA99,  ISO 9170-1.

Silbermann’s Quality Management System:

  • CE marked by the notified body TÜV-SÜD.


  • The medical gas outlet shall be
    SILBERMANN Diamond type
    manufactured according to ISO 9170-1.
  • The outlet shall be gas-specific by
    indexing each front service panel
    to a gas-specific pin indexed
    rough-in module.
  • The outlet of positive and negative
    pressure shall consist of a primary
    and secondary check     valves to allow
    testing and on-line     maintenance, i.e.,
    the front service panel shall     be
    removable for service without
    the need to     shut down the gas supply.
  • Front latch valve assembly shall
    incorporate an anodized aluminum front panel.
  • Outlet shall be manufactured with
    175 mm long, type K, 12.7 mm (1/2”) OD
    copper pipe.
    Rough-in pipe shall be silver brazed to
    the outlet body.
  • With the rough-in mounted, the outlet
    shall be     depth adjustable to compensate
    for various wall thicknesses.
  • The quick connect outlet
    shall comply with ISO 9170-1
    standard type and accept only
    corresponding Silbermann Diamond Gas
    Specific Adapter.
  • Pressure drop of less than 20 Kpa
    through     the outlet at 120 LPM and
    350 Kpa (3.5 Bar)     inlet pressure.
  • When fully open, the outlet allows a flow
    of up     to 600LPM and pressure
    of 400 KPa (4 Bars).
Related products