BS Type

We design and manufacture our Medical Gas Outlets (Terminal Units) to last and to ensure a constant and reliable medical gas flow for the patient and the medical equipment.

All outlets are 100 % tested for flow, leakage and are cleaned for oxygen services prior to shipping.

Our outlets are designed by industrial designers to ensure an appealing and pleasant environment for the patient and the medical staff.

■ Accepts BS 5682 gas-specific adapters.

■ All medical gas outlets are 100%
hydrostatic tested for leaks.
The outlets are factory-assembled,
degreased, and cleaned for medical
gas service.

■ Indexed to eliminate interchangeability
of gas services.

■ 360-degree swivel inlet pipe for
ease of installation.

Medical Gas System Standards:
■ NFPA99, EN ISO 7396-1 & HTM 02-01 requirements.

Applicable Standards:
■ ISO 9170-1, BS 5682.

Silbermann's Quality Management System:
■ CE marked by the notified body TÜV-SÜD.

■ The medical gas outlet shall be
SILBERMANN BS type BS 5682

■ The outlet shall be gas-specific by
indexing each front service panel to
a gas-specific pin-indexed
rough-in module.

■ The outlet of positive and negative
pressure shall consist of a primary
and secondary check valves to allow
testing and online maintenance.

■ Outlet shall be manufactured with
175 mm long, type K, 12.7 mm (1/2”)
OD copper pipe. Rough-in pipe shall be
silver brazed to the outlet body

■ A newly designed facia frame shall
cover the outlet

■ With the rough-in mounted,
the outlet shall be depth-adjustable
to compensate for various
wall thicknesses.

■ The outlet shall comply with
ISO 9170-1 standard type, quick
connect and accept only the
corresponding BS 5682
Gas Specific Adapter.

■ Pressure drop of less than
20 Kpa through the outlet at
120 LPM and 350 Kpa (3.5 Bar)
inlet pressure...

■ When fully open, the outlet allows
a flow of up to 600LPM
and pressure of 400 KPa (4 Bars).